12-15-2021 , 09:00 AM
https://github.com/clsid2/mpc-hc/releases 5 hours ago
@clsid2 clsid2
1.9.18
79b4c6b
1.9.18 Latest
Changes from 1.9.17 to 1.9.18:
Updates:
Updated LAV Filters to version 0.75.1-19-g80347
Changes/additions/improvements:
The seekbar thumb now follows the mouse pointer when dragging and only jumps to final seek position after the drag ends. Previously it would jump to the actual (keyframe) seek points during the drag. This could give a jumpy experience for files with large keyframe gaps or short durations.
Lowered minimum value for seekbar preview size option from 10% to 5% of screen width.
Added advanced option to disable/adjust the reload after long pause behavior.
Seekbar preview is now always disabled when playing from optical media.
Fixes:
Fixed issue with parsing subtitles that have wrong line endings (CR only).
Fixed issue where an online subtitle file wasn't parsed completely due to a filesize limitation in the code.
A few other small fixes and internal optimizations.
Overview of features
A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about:
Dark interface
Menu > View > Dark Theme
When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons.
Options > Advanced
Video preview on the seekbar
Options > Tweaks > Show preview on seek bar
Adjust playback speed
Menu > Play > Playback rate
The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%):
Options > Playback > Speed step
Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction.
Options > Playback > Output > Audio Renderer
MPC-HC can remember playback position, so you can resume from that point later
Options > Player > History
You can quickly seek through a video with Ctrl + Mouse Scrollwheel.
You can jump to next/previous file in a folder by pressing PageUp/PageDown.
You can perform automatic actions at end of file. For example to go to next file or close player.
Options > Playback > After Playback (permanent setting)
Menu > Play > After Playback (for current file only)
A-B repeat
You can loop a segment of a video. Press [ and ] to set start and stop markers.
You can rotate/flip/mirror/stretch/zoom the video
Menu > View > Pan&Scan
This is also easily done with hotkeys (see below).
There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well.
Options > Player > Keys
Tip: there is a search box above the table.
You can stream videos directly from Youtube and many other video websites
Put yt-dlp.exe in the MPC-HC installation folder.
Then you can open website URLs in the player: Menu > File > Open File/URL
You can even download those videos: Menu > File > Save a copy
Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder.
Several YDL configuration options are found here: Options > Advanced
This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder.
Note: instead of yt-dlp.exe you can also use youtube-dl.exe. I do however recommend using yt-dlp because that works better and has active development, while youtube-dl development is currently inactive.
Play HDR video
This requires using madVR or MPC Video Renderer.
After installation these renderers can be selected here:
Options > Playback > Output
Ability to search for and download subtitles, either automatically or manually (press D):
Options > Subtitles > Misc
Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc.
MPC-HC.1.9.18.x64.exe 17.1 MB Download: https://github.com/clsid2/mpc-hc/release...18.x64.exe
MPC-HC.1.9.18.x64.zip 23.2 MB Download: https://github.com/clsid2/mpc-hc/release...18.x64.zip https://github.com/mpc-hc/mpc-hc Media Player Classic - Home Cinema Media Player Classic - Home Cinema (MPC-HC) is a free and open-source (OSS) video and audio player for Windows. MPC-HC is based on the original Guliverkli project and contains many additional features and bug fixes.
We are in dire need of new developers of any kind. If you can code a little, or you can create logos for the player and images for the file associations, or you can create/maintain the main website, please join our IRC channel and talk to us. Any help is always appreciated.
Find some easy ticket on our Trac, fix the problem, send a pull request, or post the patch on Trac or come on IRC and we'll review it for you. See CONTRIBUTING.md for more info.
We care about keeping an open project open and free for contributions wherever they may come from.
Main Features
Option to remove tearing
Support for modern Windows versions, including a 64-bit build
Support for EVR/EVR CP (Enhanced Video Renderer)
Supports most types of subtitles including BluRay .sup files
Playback and recording of television programs, if a supported TV tuner card is installed
OSD info (On Screen Display)
Multi-Monitor support
Various pixel shaders
Color management
42 translations available
System Requirements
An SSE2-capable CPU
Windows Vista, 7, 8, 8.1, 10 32-bit/64-bit Media Player Classic (Home Cinema) 1.9.18 Is 100% Malware FREE & Clean Of Any Of These Malware Threats - No Backdoors, Virus, Spyware, Adware, Trojans, Worms, Ransomware, Keyloggers, Rootkits, PUPs, Scanned With Kaspersky Internet Security 21.3.12.434 Kaspersky File Advisor Trusted ( Kaspersky Security Network)
@clsid2 clsid2
1.9.18
79b4c6b
1.9.18 Latest
Changes from 1.9.17 to 1.9.18:
Updates:
Updated LAV Filters to version 0.75.1-19-g80347
Changes/additions/improvements:
The seekbar thumb now follows the mouse pointer when dragging and only jumps to final seek position after the drag ends. Previously it would jump to the actual (keyframe) seek points during the drag. This could give a jumpy experience for files with large keyframe gaps or short durations.
Lowered minimum value for seekbar preview size option from 10% to 5% of screen width.
Added advanced option to disable/adjust the reload after long pause behavior.
Seekbar preview is now always disabled when playing from optical media.
Fixes:
Fixed issue with parsing subtitles that have wrong line endings (CR only).
Fixed issue where an online subtitle file wasn't parsed completely due to a filesize limitation in the code.
A few other small fixes and internal optimizations.
Overview of features
A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about:
Dark interface
Menu > View > Dark Theme
When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons.
Options > Advanced
Video preview on the seekbar
Options > Tweaks > Show preview on seek bar
Adjust playback speed
Menu > Play > Playback rate
The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%):
Options > Playback > Speed step
Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction.
Options > Playback > Output > Audio Renderer
MPC-HC can remember playback position, so you can resume from that point later
Options > Player > History
You can quickly seek through a video with Ctrl + Mouse Scrollwheel.
You can jump to next/previous file in a folder by pressing PageUp/PageDown.
You can perform automatic actions at end of file. For example to go to next file or close player.
Options > Playback > After Playback (permanent setting)
Menu > Play > After Playback (for current file only)
A-B repeat
You can loop a segment of a video. Press [ and ] to set start and stop markers.
You can rotate/flip/mirror/stretch/zoom the video
Menu > View > Pan&Scan
This is also easily done with hotkeys (see below).
There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well.
Options > Player > Keys
Tip: there is a search box above the table.
You can stream videos directly from Youtube and many other video websites
Put yt-dlp.exe in the MPC-HC installation folder.
Then you can open website URLs in the player: Menu > File > Open File/URL
You can even download those videos: Menu > File > Save a copy
Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder.
Several YDL configuration options are found here: Options > Advanced
This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder.
Note: instead of yt-dlp.exe you can also use youtube-dl.exe. I do however recommend using yt-dlp because that works better and has active development, while youtube-dl development is currently inactive.
Play HDR video
This requires using madVR or MPC Video Renderer.
After installation these renderers can be selected here:
Options > Playback > Output
Ability to search for and download subtitles, either automatically or manually (press D):
Options > Subtitles > Misc
Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc.
MPC-HC.1.9.18.x64.exe 17.1 MB Download: https://github.com/clsid2/mpc-hc/release...18.x64.exe
MPC-HC.1.9.18.x64.zip 23.2 MB Download: https://github.com/clsid2/mpc-hc/release...18.x64.zip https://github.com/mpc-hc/mpc-hc Media Player Classic - Home Cinema Media Player Classic - Home Cinema (MPC-HC) is a free and open-source (OSS) video and audio player for Windows. MPC-HC is based on the original Guliverkli project and contains many additional features and bug fixes.
We are in dire need of new developers of any kind. If you can code a little, or you can create logos for the player and images for the file associations, or you can create/maintain the main website, please join our IRC channel and talk to us. Any help is always appreciated.
Find some easy ticket on our Trac, fix the problem, send a pull request, or post the patch on Trac or come on IRC and we'll review it for you. See CONTRIBUTING.md for more info.
We care about keeping an open project open and free for contributions wherever they may come from.
Main Features
Option to remove tearing
Support for modern Windows versions, including a 64-bit build
Support for EVR/EVR CP (Enhanced Video Renderer)
Supports most types of subtitles including BluRay .sup files
Playback and recording of television programs, if a supported TV tuner card is installed
OSD info (On Screen Display)
Multi-Monitor support
Various pixel shaders
Color management
42 translations available
System Requirements
An SSE2-capable CPU
Windows Vista, 7, 8, 8.1, 10 32-bit/64-bit Media Player Classic (Home Cinema) 1.9.18 Is 100% Malware FREE & Clean Of Any Of These Malware Threats - No Backdoors, Virus, Spyware, Adware, Trojans, Worms, Ransomware, Keyloggers, Rootkits, PUPs, Scanned With Kaspersky Internet Security 21.3.12.434 Kaspersky File Advisor Trusted ( Kaspersky Security Network)