02-09-2021 , 01:27 PM
Changing Power options
Read this article. Give images and detailed instructions for power options.
https://www.zerodollartips.com/kernel-po...indows-10/
Some of the steps listed are:-
Step (4): On the Power Options dialog box, expand the Hard disk and Turn off hard disk after option.
Step (5): After that, click on the On battery and Plugged-in option and then select Never from the drop-down menu.
Step (6): Now scroll down and expand the Sleep and then Sleep after option.
Step (7): Again click on the On battery and Plugged-in option and then select Never from the drop-down menu.
I would set the power performance plan to High performance.
As stated. Remove your battery. Run laptop from mains power. Change the above settings.
when machien is rebooting do a cold boot not soft reboot. As in turn totally off for a coulpe of minutes then power on. Not just reboot.
windows-update-troubleshooter
https://support.microsoft.com/en-us/wind...ce169755dd
Suggest you post some screen shots of event errors.
An example of error indicating display error - driver update to fix.
Add the descriptioin for each event.
Examples:-
Event ID 13:
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Variable String too Large
the message resource is present but the message is not found in the string/message table"
Event ID 41:
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event ID: 142:
Description:
The system has rebooted without cleanly shutting down first. This error is caused because the system stopped responding and the hardware watchdog triggered a system reset.
Read this article. Give images and detailed instructions for power options.
https://www.zerodollartips.com/kernel-po...indows-10/
Some of the steps listed are:-
Step (4): On the Power Options dialog box, expand the Hard disk and Turn off hard disk after option.
Step (5): After that, click on the On battery and Plugged-in option and then select Never from the drop-down menu.
Step (6): Now scroll down and expand the Sleep and then Sleep after option.
Step (7): Again click on the On battery and Plugged-in option and then select Never from the drop-down menu.
I would set the power performance plan to High performance.
As stated. Remove your battery. Run laptop from mains power. Change the above settings.
when machien is rebooting do a cold boot not soft reboot. As in turn totally off for a coulpe of minutes then power on. Not just reboot.
windows-update-troubleshooter
https://support.microsoft.com/en-us/wind...ce169755dd
Suggest you post some screen shots of event errors.
An example of error indicating display error - driver update to fix.
Add the descriptioin for each event.
Examples:-
Event ID 13:
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\Video3
Variable String too Large
the message resource is present but the message is not found in the string/message table"
Event ID 41:
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event ID: 142:
Description:
The system has rebooted without cleanly shutting down first. This error is caused because the system stopped responding and the hardware watchdog triggered a system reset.
(02-09-2021 , 08:28 AM)tarekma7 Wrote: I checked event viewer. There are 2 critical errors event 41 and 142 kernel, HAL event 13
How can this be fixed?